Dante controller

Author: s | 2025-04-24

Dante Updater is included with Dante Controller. To adjust audio controls for the Dante AVIO adapters, you will need to install Dante Controller 4.0.3.1 or later. Providing power for Dante

Dante Controller: Dante Controller is not displaying

The Dante Controller software program is a product of Audinate, the company behind the Dante™ Digital Media Networking technology. Versions of this program are available for Mac and Windows operating systems.Note: You must first register with Audinate and set up an account before you can download Dante Controller. When installed on PCs with Windows operating systems, Bonjour Print Services for Windows must be installed as a prerequisite (it is used by Dante Controller for discovery of Dante devices on the network).Bonjour Print Services for Windows can be downloaded here. Installation instructions are here.Dante Controller can be downloaded here (after registration). Installation instructions are here.Dante Controller is used to discover and configure devices on the Dante network. This program must be running on a PC or laptop connected to the same network used to carry Dante digital audio. This is the network connected to one or both of the Dante ports on the rear panel of the DNT device. These are gigabit Ethernet ports which are separate from the Ethernet port used to control the device by the DNT Control Panel program or 3rd party controllers. Click on Contents in the Dante Controller Help menu to access detailed instructions for using the program to configure audio routing in the Dante network. Reading through the Help contents is highly recommended for those new to Dante networking.Dante™ is a trademark of Audinate Pty Ltd.Windows is a registered trademark of Microsoft Corporation in the United States and other countries.Network View Device View Network ViewThis is the default view.Routing tabHere see the Dante Transmitters and Receivers detected by the program, shown in a matrix view. In this example we see that two DNT devices have been detected, with names "SPNDNT-X1B" and "SPNDNT-X1C".This tab is used to configure Dante routing, which is done by associating a Receive channel on one device with a Transmit channel on another device. This association is called a Subscription, and is accomplished by clicking on cross points with the mouse to toggle a subscription on and off. In this example, the first 8 receive channels on SPNDNT-X1B have been subscribed to the first 8 transmit channels on SPNDNT-X1C. Both transmit and receive channels have been given identifying labels. The subscriptions for receive channels on SPNDNT-X1C to transmit channels on SPNDNT-X1B are hidden because that part of the routing matrix has been collapsed in this view.See the Dante Controller Help topic "Network View->Sub-views->Routing View" to learn more.Device Status tabThis tab displays general information about all of the devices detected on the Dante network.See the Dante Controller Help topic "Using Dante Controller->Network View->Sub-views->Device Status View" to learn more.Clock Status tabThis tab displays information about the digital audio sample clocking state of devices in the Dante network. One device in the network, the Clock Master, provides the clocking for all other devices.In this example, SPNDNT-X1C is acting as the Dante Clock Master for the network.The Dante network "elects" one of the devices as Clock Master automatically. There is no need to select the DNT Device as a "Preferred Master", it will function correctly no matter which Dante device in the network is acting as Clock Master.See the Dante Controller Help topic "Using Dante Controller->Network View->Sub-views->Clock Status View" to learn more.Events tabThis tab displays displays a history of events and errors on the Dante network.See the Dante Controller Help topic "Using Dante Controller->Network View->Sub-views->Events View" to learn more.Device ViewThis view is opened by choosing the Device View option from the Device menu in Network View, or pressing Ctrl-D on the keyboard. This view presents detailed information about a single device in the Dante network. This device is selected from the drop-down list at the top of the view. In this example the device named SPNDNT-X1B has been selected.Receive tabThis tab shows information about the receive channels for the selected device. Receive channel labels appear in the "Channel" column - these fields can be edited to change the label, just click in a field and start typing. If a receive channel has been subscribed to a transmit channel on another device in the network, this is shown in the "Connected To" column, along with status information in the "Status" column. Also shown is a list of devices on the network, each of which can be expanded to show the transmit channels it has available. In this example the SPNDNT-X1C device has been expanded to show the transmit channels referenced in the subscription information in the "Connected To" column.See the Dante Controller Help topic "Using Dante Controller->Device View->Device View Tabs->Receive Tab" to learn more.Transmit tabThis tab shows information about the transmit channels for the selected device. Transmit channel labels appear in the "Channel Label" column - these fields can be edited to change the label, just click in a field and start typing. In this example the first 12 channels have been given labels.See the Dante Controller Help topic "Using Dante Controller->Device View->Device View Tabs->Transmit Tab" to learn more.Status tabThis tab presents general status information for the selected device, including IP and MAC addresses.See the Dante Controller Help topic "Using Dante Controller->Device View->Device View Tabs->Status Tab" to learn more.Device Config tabThis tab is used to configure certain properties of the selected device. The device name is set here, in "Rename Device". It is recommended that each DNT device in the Dante network be given a meaningful name to prevent confusion when configuring audio routing. It's a good idea to make it the same as the Device Name assigned to the device using the DNT Control Panel.Note: The Sample Rate parameter is defaulted to 48k for DNT devices and should not be changed.The Receive Latency setting is chosen in consideration of the network configuration. The default is 0.5 msec, the "Gigabit network with five switches" setting. This should be fine for many installations, but some thought may need to be given to this setting for exceptional cases.See the Dante Controller Help topic "Using Dante Controller->Device View->Device View Tabs->Device Config Tab" to learn more.Network Config tabThis tab is used

Dante Controller: In Dante Controller I can't see my Dante

Home / Tech Notes / Troubleshooting Dante IP Address Configuration 13-Mar-2019 Dante Testing & Troubleshooting We often receive technical support calls from customers who are setting up their first Dante network and are having issues communicating with the devices using Dante Controller. Usually this comes from confusion regarding what IP address assignment scheme is being used. It is important to make sure that all of the Dante devices, included the PC running Dante Controller, are assigned to the same IP subnet.For small networks using self-assigned IP addresses, also known as Link Local, may be appropriate. This will randomly assign IP addresses in the 169.254.x.y subnet. DHCP servers can be used to automatically assign IP addresses. For more complicated networks manually configuring unique static IP addresses to each device may be desired. Trouble can occur when not all devices have been assigned IP addresses using the same scheme.For more detailed information please consult the following page of the Dante Controller User Guide:. Dante Updater is included with Dante Controller. To adjust audio controls for the Dante AVIO adapters, you will need to install Dante Controller 4.0.3.1 or later. Providing power for Dante However, the Dante Discovery / Dante Control and Monitoring function will not be properly uninstalled if another application that uses this function (such as Dante Controller) is currently installed. WinPcap and Dante Discovery / Dante Control and

Dante Controller/DVS: In Dante Controller I can't see Dante

New software updates include new user interface, support for Mac OS X 10.10 Yosemite and Windows 8.1, new sample rates (as well as pull-up and pull-down in ASIO and Core Audio), new bit depth formats, and more WDM channels.Updates include new user interface, support for Mac OS X Yosemite and Windows 8.1, new sample rates and more WDM channelsAudinate, inventor of Dante™, the industry leading digital media networking solution, announced new releases to its popular Dante Virtual Soundcard (Release 3.7) as well as Dante Controller. Both releases support the latest Apple Mac OS X10.10 Yosemite and Microsoft Windows 8.1 operating systems.Dante Virtual Soundcard is a simple, easy-to-use software application that turns your Windows PC, Windows Server, or Mac OS X computer into a Dante-enabled device, allowing you to instantly connect to any Dante network. No special hardware is required — Dante Virtual Soundcard uses your computer’s Ethernet port to send or receive audio from Dante-enabled devices on the network.Dante Controller is a free software application for PC and Mac that enables you to route audio and configure devices on a Dante network. In addition, Dante Controller provides essential device status information and powerful real-time network monitoring, including device-level latency and clock stability stats, multicast bandwidth usage, and customized event logging.The Dante Virtual Soundcard Release 3.7 features include:New improved user interfaceSupport for sample rates from 44.1 to 192kHz, for both ASIO and Core audioSupport for 176kHz and 192kHz sample rates – for tuned, dedicated computersIncrease of WDM channels to 16 channels Devices covered in this manual;... Page 37 Complete Manual for EasyIP Systems To add a camera to the directory: 1. Select the Edit icon (pencil) for the input to pair. The Input Pairing dialog box opens. 2. To find the IP addresses of EasyIP cameras on the same subnet as the EasyIP Decoder, select Discover Devices. Page 38: Locating And Pairing To Cameras On The Network - Easyip Mixer Complete Manual for EasyIP Systems Locating and Pairing to Cameras on the Network – EasyIP Mixer IP M – V IXER IDEO NPUTS PAGE Cameras are paired to the EasyIP Mixer if the EasyIP input buttons on the Video Switching page are active. Page 39: Configuring Streaming Behavior Complete Manual for EasyIP Systems Configuring Streaming Behavior The EasyIP Decoder and EasyIP Mixer convert video from the selected input to a USB stream, which can be viewed using the computer connected to the system. Viewing a Stream To view the USB stream:... Page 40: Configuring The Usb Stream Format For Specific Applications Complete Manual for EasyIP Systems Configuring the USB Stream Format for Specific Applications YSTEM PAGE Depending on the conferencing application that you use, you may need to change the USB stream format. The Client Custom enables far-end camera control when used with the Zoom soft client. Use the default... Page 41: Locating And Pairing To Dante Devices Complete Manual for EasyIP Systems Locating and Pairing to Dante Devices ANTE ONTROLLER APPLICATION To work with Dante devices, you will need to download and install the free Dante Controller application from Audinate Pty. Ltd.: www.audinate.com/products/software/dante-controller Use the Dante Controller application to identify the Dante devices on your subnet, pair them, and optionally rename them. Page 42 Complete Manual for EasyIP Systems To pair Dante audio devices to the EasyIP Mixer: 1. From the main Network View, select Routing. 2. Use the matrix to pair receivers (speakers) and transmitters (microphones) to the EasyIP Mixer, which is both a receiver and a transmitter. Page 43: Configuring Audio Settings Complete Manual for EasyIP Systems Configuring Audio Settings IP D – A ECODER UDIO PAGE NPUTS AND UTPUTS TABS IP M – A IXER UDIO PAGE MULTIPLE TABS The web interface provides separate controls for each of the audio inputs and outputs. The EasyIP Decoder provides simple input and output controls;... Page 44: Muting And Controlling Volume Per Input Or Output Because Dante audio components connect

Dante Controller: Dante Controller is not displaying details under

DVS: What do Packet Errors mean for DVS? On Dante Controller, a red light in the Packet Errors column on the Network Status indicates that one or more media packets have been corrupted between the Dante-enabled device and the node on the other side of the Ethernet cable.You can find the error counters by double-clicking on the device name and selecting the Status tab in the Device View window, the error count indicates the number of transmit/received Cyclic Redundancy Check (CRC) or packet errors detected since the device was last started. The situation is slightly different with DVS (Dante Virtual Soundcard), the error counters of DVS are dependent on the operating system’s network interface error counter.Since DVS runs on a general-purpose computer without a dedicated network adapter for transporting Dante-only packages, the operating system’s error count value will summarize all network error traffic that has passed through the network adapter since the system or network adapter startup, with or without the running of DVS.Depending on the operating system you are using, errors may include one or multiple of the following: packet corruption, checksum error, link connection failures, buffer overflows, etc.An increase in the DVS error count is usually due to a faulty Ethernet cable or a problem with the network adapter.Note: The Clear Counters button on Dante Controller is not available for DVS. Still stuck? Let’s connect Connect with a Dante expert and get the support you need. Contact support

Dante Controller: Sometimes the refresh button in Dante controller

Part no. NIX00522PD Dante - Data Sheet download- Compact and portable for on-site events and an essential engineering "toolkit"- Provides easy and quick source selection for Operators, Producers and Directors on multi-channel audio shoots- Rapid bootup for fast deployment- Easily manage your AoIP devices and Dante subscriptions- Remotely configure and manage the network. - Easily create and delete Dante subscriptions- PIN Protection for critical operations- Built-in tone generators for testing and trouble shooting- Save presets for instant recall of individual event settings for quick configuration and setupThe device is operated and controlled via the large 5.0” diagonal (127mm) 24bit colour LCD and capacitive touch panel.A simple and elegant menu system has been designed to be intuitive to navigate allowing the user to access all the features of the PD Dante very quickly.The high resolution screen is easy to read presenting comprehensive metering, routing and status information to the user. Nixer PD Dante Specifications A small portable Dante unit, which allows the monitoring of up to 64 Dante channels at 48kHz (32 channels at 96kHz). The signals are presented to the user via the inbuilt speakers or the headphone jack. The speakers are automatically muted when a headphone jack is inserted. Simultaneous outputs are also available in the form of the stereo balanced line outputs and AES output accessed via the 15way D-type.The speakers and headphones have independent settings for volume, the unit recalling the last used setting for each when changing between speakers and headphones.It also includes a comprehensive Dante network controller for managing network subscriptions, ethernet config etc Functionality Monitor up to 64 channels of audio from Dante NetworkTwo modes of operation Mix mode or Listen ModeControl Dante deivces on the same network Change Dante network settingsAdd and delete Dante subscriptonsChange Sample rates Change device and channel namesBuilt in. Dante Updater is included with Dante Controller. To adjust audio controls for the Dante AVIO adapters, you will need to install Dante Controller 4.0.3.1 or later. Providing power for Dante

Dante - Using Dante Controller - YouTube

Solid State Logic has announced an update to its SSL Live console range, with the SSL Live V6 adding a new effects suite, Dante routing enhancements, remote control updates, and more. The new update brings studio processing tools such as Fusion FX and Path Compressor Mix Control to the stage via SSL Live, while the Sourcerer and Blitzer effect rack modules can now be controlled directly from the TaCo app.The onboard Fusion Effect Rack is designed to faithfully emulate the five key color circuits found on the SSL Fusion rack mounted hardware: Vintage Drive, Violet EQ, HF Compressor, Stereo Image, and Transformer. These modules provide five coloration tools designed to bring the designed combination of added tonal character, weight and space to the mix bus or stereo stems. SSL has also added additional features found in the Fusion plugin series. ​ ​Meanwhile, parallel compression is now available on all channels and buses via the Path Compressor Mix Control, accessible directly from both the touch screen and hardware controls. ​Further, the TaCo app has been updated so users can gain full remote control over the Sourcerer and Blitzer effect rack modules directly from the app. The app provides wireless control of SSL Live consoles from iPad or Android devices and can be used anywhere in the venue or alongside the console. ​ ​The enhanced Dante Routing Modes now include both the standard Showfile Saved mode as well as a new Outside of Showfile mode. There’s full Dante routing directly from the console, and users can choose to store routes within the showfile or configure them as independent, system-wide Dante routes. This transforms the console into a Dante controller, enabling management of system-level routing across the network. Users can create Dante routes that persist even after the console is powered down or a different showfile is loaded to help ensure uninterrupted system operation.Also, a new “Dante Allowed Device List” lets users control and manage which Dante devices are visible and routable on the console. This well suited for many applications, such as fixed installations where freelance engineers may be authorized to access the console routing but perhaps not other resources that may be restricted. ​ ​The new V6 update also includes a System Set Minimum virtual tie line counts, which streamlines showfile routing for fixed installations. Even if a loaded showfile specifies a lower number of tie lines, the system will enforce this minimum, preserving “house set” connections that guest engineers cannot alter.SSL Live V6 will be available in January 2025 as a free download for the entire console range. Go here for more specifics.Solid State Logic