T clock

Author: l | 2025-04-24

★★★★☆ (4.2 / 2365 reviews)

super voice changer

T-Minus: Countdown Clock Download - T-Minus Countdown Clock and Project Management Tools. T-Minus: Countdown Clock Download - T-Minus Countdown Clock and

free screenwriting program

T Clock SpA - Transporte de Personal - T-Clock

From master to slave synchronizes its local clock to upstream devices and provides synchronization to downstream devices. Clock Selection: G.8275.1 profile also defines an alternate BMCA that selects a clock for synchronization and port state for the local ports of all devices in the network is defined for the profile. The parameters defined as a part of the BMCA are: Clock Class Clock Accuracy Offset Scaled Log Variance Priority 2 Local Priority Clock Identity Steps Removed Port Identity Port State Decision: The port states are selected based on the alternate BMCA. Alternate BMCA: It follows the alternate BMCA dataset comparison algorithm as defined in Rec. ITU-T G.8275.1/Y.1369.1 to select the GM for the node. Packet Rates: The nominal packet rate for Announce packets is 8 packets-per-second and 16 packets-per-second for Sync/Follow-Up and Delay-Request/Delay-Response packets. Transport Mechanism: G.8275.1 profile only supports Ethernet PTP transport mechanism. Mode: G.8275.1 profile supports transport of data packets only in multicast mode. The forwarding is done based on forwardable or non-forwardable multicast MAC address. Clock Type: G.8275.1 profile supports the following clock types: Telecom Grandmaster (T-GM): Provides timing for other network devices and does not synchronize its local clock to other network devices. Telecom Time Slave Clock (T-TSC): A slave clock synchronizes its local clock to another PTP clock, but does not provide PTP synchronization to any other network devices. Telecom Boundary Clock (T-BC): Synchronizes its local clock to a T-GM or an upstream T-BC clock and provides timing information to downstream T-BC or T-TSC clocks. Note Telecom Boundary Clock (T-BC) is the only clock type supported in Cisco NX-OS Release 9.3(5). Domain Numbers: The domain numbers that can be used in a G.8275.1 profile network ranges from 24 to 43. The default domain number is 24. High Availability for PTP Stateful restarts are not supported Sign is used.Q3: At what time between 3 and 4 o’clock, the hands makes an angle of 10 degrees?Solution:Given: H = 3 , A = 10Since both three and four lies in the first half considered a positive sign.Calculations:T = 2/11 [H*30±A]T = 2/11 [3*30+10]T = 2/11 [90+10]T = 2/11 [100]T = 200/11T =18 2/11The answer indicates that the hands of a clock will make an angle of 10 between 3 and 4 o’clock at exactly 3:18:2/11 ( 3’ o clock 18 minutes and 2/11 of minutes = 2/11*60 = 10.9 seconds)A few other links to logical reasoning based concept have been given below in the table, candidates can refer to the these for any kind of assistance:Correct clock v/s Wrong clock:This section involves the comparison of time in the accurate clock with the wrong watch. The wrong time indicates that a clock is either slow or fast compared to the correct time. The wrong clock can either be fast or delayed by a few seconds/minutes/ hours or sometimes by a few days and weeks.Q.4 A clock gains 5 seconds for every 3 minutes. If the clock started working at 7 a.m. in the morning, then what will be the time in the wrong clock at 4 p.m. on the same day?Solution:A clock gains 5 seconds for every 3 minutes, then it will gain 50 seconds in 30 minutes, or it will acquire 100 seconds in 60 minutes. i.e. it will gain 100 seconds in 1 hour. Since the clock

Does T-Clock / T-Clock Redux work in Windows 11? :

= 503, data = -517)RAM: rd req t-side?=1 addr 1023FSM: Enqueued pipeline output 2x write requestt_index = 1017 t data -516,u_index = 505 u data -520RAM: read response t-side?=0 data = -486RAM: Dequeue 2x write reqt enabled 1, t addr = 1015, t data = -465,u enabled 1, u addr = 503, u data = -517FSM: Dequeued 2x read response as butterfly pipeline input:s = 10, k = 0, j = 509,t data = -513, u data = -513...ResultsIn this #define FFT_USE_FULL_HARDWARE mode of operation, the compute_fft_cc function simply reads NFFT=1024 elements out of the FFT results FIFO repeatedly:void compute_fft_cc(fft_in_t* input, fft_out_t* output){ // FFT done in hw, just copy results to output for (uint32_t i = 0; i NFFT; i++) { fft_out_READ(&(output[i])); }}Because of that, it no longer makes sense to use the time for one compute_fft_cc as the measure of FFT speed. Measuring the speed of unloading FFT outputs via fft_out_READ is at best approximating a measure of how fast samples can be loaded into the hardware (1 FFT output for each sample input) ~= 44.1K samples per second.Instead a counter was added into the FFT's 1x clock domain to measure just the computation part of the FFT algorithm executing butterfly iterations (not loading or unloading samples/outputs):FFT Compute Clock = 50MHz, RAM Clock = 100MHzfft_2pt_w_omega_lut 1 cycle pipeline (2 stages)Min 1 cycle from BROM omega LUT5380 50MHz clock cycles for butterfly iterations of FFT5380 * 20ns~107 us per FFT~9.2K FFT's per sec (ideal not counting samples onload/offload)NFFT=1024 means capable of ~9.2 MSPS ideal sustained input rateFFT Compute Clock = 100MHz, RAM Clock = 200MHzfft_2pt_w_omega_lut 3 cycle pipeline (4 stages)1 cycle for omega_s_j_to_index math to get ROM index from s,j iterators1 cycle from BROM omega LUT1 cycle for 2pt butterfly (cycle is used for multiply part)5400 100MHz clock cycles for butterfly iterations of FFT5400 * 10ns54 us per FFT~18.5K FFT's per sec (ideal not counting samples onload/offload)NFFT=1024 means capable of ~18.9 MSPS ideal sustained input rateQuite a way aways from ~1/8th of an FFT per second using the 6.25MHz RV32IM CPU soft floating point version where this started.Future WorkContinuous. T-Minus: Countdown Clock Download - T-Minus Countdown Clock and Project Management Tools. T-Minus: Countdown Clock Download - T-Minus Countdown Clock and T-Minus: Countdown Clock Download - T-Minus Countdown Clock and Project Management Tools. T-Minus: Countdown Clock Download - T-Minus Countdown Clock and

Does T-Clock / T-Clock Redux work in Windows 11?

Home > desktop > screen savers > t-minus christmas countdown Download URL | Author URL | Software URL | Buy Now ($9.99)T-Minus Christmas Countdown Clock. Waiting for Christmas? Planning a special Christmas party for family, friends or co-workers? Now you can count down the time until the biggest holiday of the year. You can play our holiday music or add your favorite Christmas song as background!Your anticipation will build as you count down the days, hours and minutes.Related software (5) T-Minus Anniversary Countdown Whether it's your first or your fifty-first anniversary, now you can count down the time to this special date. You can play our "champagne toast" or insert your wedding song as bac ... T-Minus Bar-Bat Mitvahs Countdown T-Minus Bar-Bat Mitzvahs Countdown Clock. Looking forward to a Bar Mitzvahs or Bat Mitzvahs? Now you can count down the time to this significant event! T-Minus Election Day Countdown Are you involved with an election campaign?Trying to motivate voters? Now anyone can count down the time to Election Day. T-Minus Fourth of July Countdown T-Minus Fourth of July Countdown Clock. Are you planning a Fourth of July celebration? Will you see a parade or watch the fireworks? No matter how you celebrate, now can you count ... T-Minus Retirement Countdown Do you look forward to retirement? Now you can count down the time to your first day of retirement! You can play our music or insert your own favorite song! Foster, R. Photic Entrainment of the Circadian Clock: From Drosophila to Mammals. Semin. Cell Dev. Biol. 2001, 12, 317–328. [Google Scholar] [CrossRef]Albrecht, U. The Circadian Clock, Metabolism and Obesity. Obes. Rev. 2017, 18 (Suppl. 1), 25–33. [Google Scholar] [CrossRef] [PubMed] [Green Version]Rijo-Ferreira, F.; Takahashi, J.S. Genomics of Circadian Rhythms in Health and Disease. Genome Med. 2019, 11, 82. [Google Scholar] [CrossRef] [PubMed] [Green Version]Sulli, G.; Lam, M.T.Y.; Panda, S. Interplay between Circadian Clock and Cancer: New Frontiers for Cancer Treatment. Trends Cancer 2019, 5, 475–494. [Google Scholar] [CrossRef] [PubMed]Reppert, S.M.; Schwartz, W.J. Maternal Coordination of the Fetal Biological Clock in Utero. Science 1983, 220, 969–971. [Google Scholar] [CrossRef]Ono, M.; Ando, H.; Daikoku, T.; Fujiwara, T.; Mieda, M.; Mizumoto, Y.; Iizuka, T.; Kagami, K.; Hosono, T.; Nomura, S.; et al. The Circadian Clock, Nutritional Signals and Reproduction: A Close Relationship. Int. J. Mol. Sci. 2023, 24, 1545. [Google Scholar] [CrossRef]Kovanen, L.; Saarikoski, S.T.; Aromaa, A.; Lönnqvist, J.; Partonen, T. ARNTL (BMAL1) and NPAS2 Gene Variants Contribute to Fertility and Seasonality. PLoS ONE 2010, 5, e10007. [Google Scholar] [CrossRef]Jud, C.; Albrecht, U. Circadian Rhythms in Murine Pups Develop in Absence of a Functional Maternal Circadian Clock. J. Biol. Rhythm. 2006, 21, 149–154. [Google Scholar] [CrossRef]Astiz, M.; Oster, H. Feto-Maternal Crosstalk in the Development of the Circadian Clock System. Front. Neurosci. 2021, 14, 631687. [Google Scholar] [CrossRef]Bates, K.; Herzog, E.D. Maternal-Fetal Circadian Communication During Pregnancy. Front. Endocrinol. 2020, 11, 198. [Google Scholar] [CrossRef] [PubMed] [Green Version]Han, L.W.; Gao, C.; Mao, Q. An Update on Expression and Function of P-Gp/Abcb1 and Bcrp/Abcg2 in the Placenta and Fetus. Expert Opin. Drug Metab. Toxicol. 2018, 14, 817–829. [Google Scholar] [CrossRef]Staud, F.; Karahoda, R. Trophoblast: The Central Unit of Fetal Growth, Protection and Programming. Int. J. Biochem. Cell Biol. 2018, 105, 35–40. [Google Scholar] [CrossRef] [PubMed]Nakamura, Y.; Tamura, H.; Kashida, S.; Takayama, H.; Yamagata, Y.; Karube, A.; Sugino, N.; Kato, H. Changes of Serum Melatonin Level and Its Relationship to Feto-Placental Unit during Pregnancy. J. Pineal Res. 2001, 30, 29–33. [Google Scholar] [CrossRef] [PubMed]Naitoh, N.; Watanabe, Y.; Matsumura, K.; Murai, I.; Kobayashi, K.; Imai-Matsumura, K.; Ohtuka, H.; Takagi, K.; Miyake, Y.; Satoh, K.; et al. Alteration by Maternal Pinealectomy of Fetal and Neonatal Melatonin and Dopamine D1 Receptor Binding in the Suprachiasmatic Nuclei. Biochem. Biophys. Res. Commun. 1998, 253, 850–854. [Google Scholar] [CrossRef] [PubMed]Antle, M.C.; LeSauter, J.; Silver, R. Neurogenesis and Ontogeny of Specific Cell Phenotypes within

T-Clock/README.md at master White-Tiger/T-Clock - GitHub

Overview Description Target Devices Description Renesas Precision Time Protocol (PTP) Clock Manager for Linux (pcm4l) software supports IEEE 1588 and Synchronous Ethernet communication requirements to meet stringent ITU-T Network synchronization and time distribution. PTP Clock Manager is meant to complement an IEEE 1588-2008/2019 compliant PTP stack and features a clock servo and Packet Delay Variation (PDV) filter to meet the needs of ITU-T standard G.8273.4 and G.8263. While designed for use with the ClockMatrix™ synchronizers from Renesas, which support ITU-T standard G.8273.2 filtering in hardware, it can also be used with older generation devices. The PTP Clock Manager software is provided free of charge (under license) as long as it is paired with a clock synchronization device (such as the 8A34001) from Renesas.In conjunction with this software, Renesas has developed and helps maintain a PTP kernel driver in mainline Linux, creating a proven solution for managing timestamps and establishing synchronization across the network. Renesas is actively working with TSU vendors to get the PTP kernel drivers included in their software distribution. We expect customers to have the PTP kernel drivers implemented and functioning properly prior to attempting to use the PTP Clock Manager software. For designs based on Xilinx MPSoC or RFSoC, Renesas can provide ZCU102/ZCU111 files based on Vivado/PetaLinux 2018.3 and ZCU102 files based on Vivado/PetaLinux 2020.1. If more hands on assistance is required, customers should engage with sales to discuss fees applicable for such support.The primary source of the Renesas Clock Synthesizer driver set is from the Linux kernel. Our in-tree drivers can be found in the kernel source under drivers/ptp (for ptp_clockmatrix.c, ptp_clockmatrix.h, ptp_idt82p33.c and ptp_idt82p33.h) and drivers/mfd (for rsmu, rsmu_i2c and rsmu_spi). Since there is a delay to get the most recent version of the drivers accepted into the kernel and additional delay for individual distributions

T-Clock Redux: In an enhanced fork of Stoic Joker's T-Clock

Motherboard MSI Memory Yes (I think...) Graphics Card(s) Radeon off-brand knockoff clone Screen Resolution 3840x2160 Other Info Cat: Chester Local time 9:01 PM Posts 9 OS Win 10 Home & 11 Pro & Linux Pop OS #34 I used to use T-Clock. It was great, but it doesn't work anymore.The Windows clock and date is so small now.The crazy thing is that the Taskbar is very high, yet the tray icons only consume about half the height.It appears that you have to edit the Registry to change the height. T-Clock works on Windows 11 if you use ExplorerPatcher; it restores the Win 10 taskbar. I looked at the other clock options in this thread, and I still like T-Clock best. I have one PC that is eligible for 11, and I finally pulled the trigger. In my opinion, Win 11 is a downgrade from 10. Still needs more consistency and intuitiveness. I fixed the Taskbar height with Winero. My Computer OS Win 10 Home & 11 Pro & Linux Pop OS Computer type PC/Desktop Manufacturer/Model MicroElectronics B743 1.0 (Micro Center) PowerSpec CPU Intel(R) Core(TM) i7-9700K CPU @ 3.60GHz 3.60 GHz Motherboard ASRock Z390 Phantom Gaming 4S/ac Memory 16036 Megabytes Usable Installed Memory Graphics Card(s) Intel(R) UHD Graphics 630 [Display adapter] Sound Card Realtek(R) Audio Monitor(s) Displays VIZ E220VA [Monitor] (21.7"vis) & HP S2031 [Monitor] (19.9"vis, s/n 3CQ144N2TQ, October 2011) Screen Resolution 1920 x 1080 Hard Drives INTEL SSDPEKNW512G8 [Hard drive] (512.11 GB)ST1000DM003-1ER162 [Hard drive] (1000.20 GB)ST1500DL003-9VT16L [Hard drive] (1500.30 GB)ST2000DM008-2FR102. T-Minus: Countdown Clock Download - T-Minus Countdown Clock and Project Management Tools. T-Minus: Countdown Clock Download - T-Minus Countdown Clock and T-Minus: Countdown Clock Download - T-Minus Countdown Clock and Project Management Tools. T-Minus: Countdown Clock Download - T-Minus Countdown Clock and

White-Tiger T-Clock Redux: Updated version of T-Clock - narkive

Nakamura, W.; Yamazaki, S.; Kudo, T.; Cutler, T.; Colwell, C.S.; Block, G.D. Age-Related Decline in Circadian Output. J. Neurosci. 2011, 31, 10201–10205. [Google Scholar] [CrossRef]Farajnia, S.; Michel, S.; Deboer, T.; vanderLeest, H.T.; Houben, T.; Rohling, J.H.T.; Ramkisoensing, A.; Yasenkov, R.; Meijer, J.H. Evidence for Neuronal Desynchrony in the Aged Suprachiasmatic Nucleus Clock. J. Neurosci. 2012, 32, 5891–5899. [Google Scholar] [CrossRef] [Green Version]Nakamura, T.J.; Takasu, N.N.; Nakamura, W. The Suprachiasmatic Nucleus: Age-Related Decline in Biological Rhythms. J. Physiol. Sci. 2016, 66, 367–374. [Google Scholar] [CrossRef] [PubMed]Scheuermaier, K.; Laffan, A.M.; Duffy, J.F. Light Exposure Patterns in Healthy Older and Young Adults. J. Biol. Rhythm. 2010, 25, 113–122. [Google Scholar] [CrossRef]Kessel, L.; Lundeman, J.H.; Herbst, K.; Andersen, T.V.; Larsen, M. Age-Related Changes in the Transmission Properties of the Human Lens and Their Relevance to Circadian Entrainment. J. Cataract Refract. Surg. 2010, 36, 308–312. [Google Scholar] [CrossRef]Biello, S.M. Circadian Clock Resetting in the Mouse Changes with Age. Age 2009, 31, 293–303. [Google Scholar] [CrossRef]Jiang, Z.; Zou, K.; Liu, X.; Gu, H.; Meng, Y.; Lin, J.; Shi, W.; Yu, C.; Jin, L.; Wang, L.; et al. Aging Attenuates the Ovarian Circadian Rhythm. J. Assist. Reprod. Genet. 2021, 38, 33–40. [Google Scholar] [CrossRef]Lee, J.; Sul, H.J.; Choi, H.; Oh, D.H.; Shong, M. Loss of Thyroid Gland Circadian PER2 Rhythmicity in Aged Mice and Its Potential Association with Thyroid Cancer Development. Cell Death Dis. 2022, 13, 898. [Google Scholar] [CrossRef]Silva, B.S.d.A.; Uzeloto, J.S.; Lira, F.S.; Pereira, T.; Coelho-E-Silva, M.J.; Caseiro, A. Exercise as a Peripheral Circadian Clock Resynchronizer in Vascular and Skeletal Muscle Aging. Int. J. Environ. Res. Public Health 2021, 18, 12949. [Google Scholar] [CrossRef]Schmitt, E.E.; Johnson, E.C.; Yusifova, M.; Bruns, D.R. The Renal Molecular Clock: Broken by Aging and Restored by Exercise. Am. J. Physiol. Renal Physiol. 2019, 317, F1087–F1093. [Google Scholar] [CrossRef]Bruns, D.R.; Yusifova, M.; Marcello, N.A.; Green, C.J.; Walker, W.J.; Schmitt, E.E. The Peripheral Circadian Clock and Exercise: Lessons from Young and Old Mice. J. Circadian Rhythm. 2020, 18, 7. [Google Scholar] [CrossRef] [PubMed]Noh, S.G.; Jung, H.J.; Kim, S.; Arulkumar, R.; Kim, D.H.; Park, D.; Chung, H.Y. Regulation of Circadian Genes Nr1d1 and Nr1d2 in Sex-Different Manners during Liver Aging. Int. J. Mol. Sci. 2022, 23, 10032. [Google Scholar] [CrossRef] [PubMed]Valentinuzzi, V.S.; Scarbrough, K.; Takahashi, J.S.; Turek, F.W. Effects of Aging on the Circadian Rhythm of Wheel-Running Activity in C57BL/6 Mice. Am. J. Physiol. 1997, 273, R1957–R1964. [Google Scholar] [CrossRef] [PubMed]Souza, K.A.; Powell,

Comments

User5572

From master to slave synchronizes its local clock to upstream devices and provides synchronization to downstream devices. Clock Selection: G.8275.1 profile also defines an alternate BMCA that selects a clock for synchronization and port state for the local ports of all devices in the network is defined for the profile. The parameters defined as a part of the BMCA are: Clock Class Clock Accuracy Offset Scaled Log Variance Priority 2 Local Priority Clock Identity Steps Removed Port Identity Port State Decision: The port states are selected based on the alternate BMCA. Alternate BMCA: It follows the alternate BMCA dataset comparison algorithm as defined in Rec. ITU-T G.8275.1/Y.1369.1 to select the GM for the node. Packet Rates: The nominal packet rate for Announce packets is 8 packets-per-second and 16 packets-per-second for Sync/Follow-Up and Delay-Request/Delay-Response packets. Transport Mechanism: G.8275.1 profile only supports Ethernet PTP transport mechanism. Mode: G.8275.1 profile supports transport of data packets only in multicast mode. The forwarding is done based on forwardable or non-forwardable multicast MAC address. Clock Type: G.8275.1 profile supports the following clock types: Telecom Grandmaster (T-GM): Provides timing for other network devices and does not synchronize its local clock to other network devices. Telecom Time Slave Clock (T-TSC): A slave clock synchronizes its local clock to another PTP clock, but does not provide PTP synchronization to any other network devices. Telecom Boundary Clock (T-BC): Synchronizes its local clock to a T-GM or an upstream T-BC clock and provides timing information to downstream T-BC or T-TSC clocks. Note Telecom Boundary Clock (T-BC) is the only clock type supported in Cisco NX-OS Release 9.3(5). Domain Numbers: The domain numbers that can be used in a G.8275.1 profile network ranges from 24 to 43. The default domain number is 24. High Availability for PTP Stateful restarts are not supported

2025-04-06
User6880

Sign is used.Q3: At what time between 3 and 4 o’clock, the hands makes an angle of 10 degrees?Solution:Given: H = 3 , A = 10Since both three and four lies in the first half considered a positive sign.Calculations:T = 2/11 [H*30±A]T = 2/11 [3*30+10]T = 2/11 [90+10]T = 2/11 [100]T = 200/11T =18 2/11The answer indicates that the hands of a clock will make an angle of 10 between 3 and 4 o’clock at exactly 3:18:2/11 ( 3’ o clock 18 minutes and 2/11 of minutes = 2/11*60 = 10.9 seconds)A few other links to logical reasoning based concept have been given below in the table, candidates can refer to the these for any kind of assistance:Correct clock v/s Wrong clock:This section involves the comparison of time in the accurate clock with the wrong watch. The wrong time indicates that a clock is either slow or fast compared to the correct time. The wrong clock can either be fast or delayed by a few seconds/minutes/ hours or sometimes by a few days and weeks.Q.4 A clock gains 5 seconds for every 3 minutes. If the clock started working at 7 a.m. in the morning, then what will be the time in the wrong clock at 4 p.m. on the same day?Solution:A clock gains 5 seconds for every 3 minutes, then it will gain 50 seconds in 30 minutes, or it will acquire 100 seconds in 60 minutes. i.e. it will gain 100 seconds in 1 hour. Since the clock

2025-04-20
User3644

= 503, data = -517)RAM: rd req t-side?=1 addr 1023FSM: Enqueued pipeline output 2x write requestt_index = 1017 t data -516,u_index = 505 u data -520RAM: read response t-side?=0 data = -486RAM: Dequeue 2x write reqt enabled 1, t addr = 1015, t data = -465,u enabled 1, u addr = 503, u data = -517FSM: Dequeued 2x read response as butterfly pipeline input:s = 10, k = 0, j = 509,t data = -513, u data = -513...ResultsIn this #define FFT_USE_FULL_HARDWARE mode of operation, the compute_fft_cc function simply reads NFFT=1024 elements out of the FFT results FIFO repeatedly:void compute_fft_cc(fft_in_t* input, fft_out_t* output){ // FFT done in hw, just copy results to output for (uint32_t i = 0; i NFFT; i++) { fft_out_READ(&(output[i])); }}Because of that, it no longer makes sense to use the time for one compute_fft_cc as the measure of FFT speed. Measuring the speed of unloading FFT outputs via fft_out_READ is at best approximating a measure of how fast samples can be loaded into the hardware (1 FFT output for each sample input) ~= 44.1K samples per second.Instead a counter was added into the FFT's 1x clock domain to measure just the computation part of the FFT algorithm executing butterfly iterations (not loading or unloading samples/outputs):FFT Compute Clock = 50MHz, RAM Clock = 100MHzfft_2pt_w_omega_lut 1 cycle pipeline (2 stages)Min 1 cycle from BROM omega LUT5380 50MHz clock cycles for butterfly iterations of FFT5380 * 20ns~107 us per FFT~9.2K FFT's per sec (ideal not counting samples onload/offload)NFFT=1024 means capable of ~9.2 MSPS ideal sustained input rateFFT Compute Clock = 100MHz, RAM Clock = 200MHzfft_2pt_w_omega_lut 3 cycle pipeline (4 stages)1 cycle for omega_s_j_to_index math to get ROM index from s,j iterators1 cycle from BROM omega LUT1 cycle for 2pt butterfly (cycle is used for multiply part)5400 100MHz clock cycles for butterfly iterations of FFT5400 * 10ns54 us per FFT~18.5K FFT's per sec (ideal not counting samples onload/offload)NFFT=1024 means capable of ~18.9 MSPS ideal sustained input rateQuite a way aways from ~1/8th of an FFT per second using the 6.25MHz RV32IM CPU soft floating point version where this started.Future WorkContinuous

2025-03-27

Add Comment