Usb image writer

- Copy the .raw file to an USB stick using SUSE Studio Image Writer If you have error during copy, eject and re-connect the pen drive. When Windows asks if you want to format it, cancel and run Image Writer again. If the problem persists, disable your anti-virus software, it may be blocking raw write to the drive. Another Image Writer for Windows, if SUSE doesn't work - Boot the USB drive and install. Default boot loader is Clover If you want to use Chameleon press 1 at boot0 screen If you need, use TransMac to delete kexts which are causing problems (System/Library/Extensions) and delete kernelcache (System/Library/Caches/com.apple.kext.caches/Startup) If boot stops right before reaching the installer, or graphics aren't working right, delete video kexts: ATI = ATI* Intel = AppleIntelHD* and AppleIntelSNB* nVidia = GeForce* and NVDA* You can also move kexts booting with flag -s (single user mode)fsck -fymount -uw /mkdir /kext_backupcd /System/Library/Extensionsmv AppleIntelHD* AppleIntelSNB* ATI* GeForce* NVDA* /kext_backuprm ../Caches/com.apple.kext.caches/Startup/kernelcachereboot You need at least one free partition, use Disk Utility (in the Utilities menu) to erase it as Mac Os Extended (Journaled). If you want to install the boot loader in this partition and you use MBR (not GUID, like if you already have Windows in the HD), it must be a primary (not extended/logical) partition. Wait for the installation to finish and restart. - Boot the USB drive, then choose to boot the HD you just installed OS X (not the installer USB again). - Install boot loader to the HD. - Install essential and other kexts you may need (network, audio, etc). FakeSMC.kext is always needed While you don't have power management fixed, you will probably need NullCPUPowerManagement.kext NullCPUPowerManagement.kext.zip If you use PS/2 keyboard or a laptop you will need VoodooPS2Controller.kext - When you format the USB drive

You to press to reach startup options. Go to "startup options" and select the USB drive with the partition manager. Boot into the partition manager and delete all partitions, making sure all the space on the disk is unallocated. You should be able to figure it out, if you are confused there are a multitude of help articles and youtube videos on the subject.Installing DOS from USBOnce you download the FreeDOS zip file, extract it and use your preferred USB disk image writer to burn the FreeDOS .IMG to a USB stick. It's fairly straightfoward -- select the USB drive you want, select the disk image, and let the tool do its magic. It doesn't take up very much space and the installation should only take a few seconds. The USB writer I use is called "Rufus". If you're on Linux, you can probably get one from whatever package manager you have -- I seem to remember Linux Mint having one bundled with the operating system, back when I used it. Once you have the image, insert it into the old PC you want to install DOS on. This is the same process you did with the partition manager. Boot it up, and then when the BIOS loading screen comes up, press f12 or f2 or whatever key it says to press for startup options. This screen will be the screen that shows your PC manufacturer's name: for me, it said DELL. It might be HP, or something else. Once you're in your BIOS setup, go to "startup options" and select your USB drive from the menu, and not the hard drive.Once you boot into the USB stick, just follow the instructions. The tool should format and install DOS, it was fairly straightforward for me and went down without a hitch. It may have you reboot your PC -- it did for me. If it does this, you will have to enter startup options again and boot into the USB stick again -- it will not automatically boot into the stick.Once it's done, remove the USB and boot into your

Topic This article describes the method for imaging Datto Utilities onto a USB drive. Environment Datto Utilities Description The Datto Utilities environment (sometimes referred to as "Datto Stick"), is available for download at download.datto.com. The Datto Utilities application includes the Bare Metal Restore (BMR), SIRIS Imaged, and Datto Endpoint Backup restoration environments. Each of these are separate products that have their own unique uses and workflows. Datto updates Datto Utilities on a regular basis. Ensure that the USB stick has the latest version available from downloads.datto.com before use. The Datto Utilities version of the Bare Metal Restore (BMR) environment is only available for Datto appliances running the Datto IRIS 4 (Ubuntu 20.04) OS. Before using the Bare Metal Restore utility to image new hardware, it is critical to review all hardware prerequisites in the BMR Getting started article. Before using the SIRIS Imaged utility to image new hardware for use as a SIRIS device, it is critical to review all hardware prerequisites in the Getting started with SIRIS Imaged article. Datto Utilities is only compatible with writable USB media. Attempts to run the application from read-only media, such as a CD or DVD, will produce unreliable results. Prerequisites The following items should be available when starting this process: USB drive that is at least 8GB. USB drive must be at least 2.0, but 3.0 is strongly recommended. Datto recommends using the latest version of balenaEtcher to image the drive. Any other tool that writes the image directly to the destination without altering it can be used to image your USB stick. Examples include Win32DiskImager, Fedora Media Writer, USBImager, and dd. Do not use UNetbootin, Rufus, RMPrepUSB, Universal USB Installer, Ventoy, or livecd-iso-to-disk. NOTE ">NOTE Earlier versions of this article contained instructions for using Rufus or UNetbootin to image the USB drive. These solutions will NO LONGER BE COMPATIBLE with new versions (8 and higher) of Datto Utilities and so should no longer be used. IMPORTANT ">IMPORTANT Imaging your USB drive will format it entirely. Make sure the USB drive contains no valuable data before imaging. Obtaining the ISO Download the Datto Utilities image (.ISO) from the Datto Downloads page by navigating to the Datto Images tab and clicking the Download link under the Datto Utilities ISO section. Once the image file has downloaded, proceed to the next section. Imaging the USB Drive with balenaEtcher A free version of balenaEtcher is